Rescreen or Replace a Pool Cage? How to Decide (Florida)
Short answer
Rescreen when the aluminum frame is straight, the fasteners and anchors are sound and the problem is worn or torn mesh. Consider replacement when members are bent or corroded, anchors are loose, the frame moves noticeably in wind, or storm damage is widespread. A contractor's on-site inspection of the structure, not the screen, is what settles the question.
Last updated: November 2026
The screen and the frame age differently
A pool cage has two very different parts. The screen is a wear item: it sits in direct Florida sun every day, it gets hit by branches and pets, and it slowly loses strength and color. The aluminum frame, when it was designed, anchored and maintained properly, is built to last much longer. That is why most cages need new screen at least once before the structure itself needs attention.
The decision therefore comes down to a single question: is the frame still a sound place to hang new screen? If yes, rescreening is almost always the better value. If no, new screen on a failing structure only delays a larger project and means paying for screen twice. The rest of this guide explains how to tell the difference, what a careful contractor looks for, and where permits and current wind-load requirements come into it.
Frame age and corrosion
Age alone does not condemn a cage. A well-built older enclosure can still be straight and solid, while a newer one that was under-built or poorly anchored can already be struggling. What matters is the condition you can see and feel. Walk the perimeter and look at every column and beam. Are any bowed, kinked or twisted? Do the roof members sag between supports? Are there signs of past repairs such as mismatched members or extra brackets bolted over damage?
Corrosion is the next thing to check. Aluminum resists rust, but it can corrode where it meets steel fasteners, where water collects at the base of columns, and on properties close to salt air or with irrigation spraying the frame. White, powdery buildup, pitting, or flaking paint around connections is a warning sign. Light surface oxidation is common and often cosmetic; deep pitting at structural connections is not. Homes nearer the Gulf coast tend to see this sooner than inland homes, which is one reason two cages of similar age can be in very different shape.
Fastener and anchor condition
The fasteners hold the structure together, and the anchors tie it to the deck and the house. Both matter more than many homeowners realize. Look closely at the screws at beam-to-column connections. Rust streaks, heads that have corroded away, or screws that spin without tightening mean the joint is no longer doing its job. A professional will often replace failing fasteners during a rescreen, and that is normal maintenance.
Anchors are a bigger concern. Check where each column meets the deck. Is the base plate tight? Is the concrete around it cracked, crumbling or lifting? Where the cage connects to the house, has the attachment pulled away from the fascia or wall? If you push firmly on a column and the frame racks or shifts, the problem is structural. A few loose anchors can sometimes be re-set; widespread anchor failure or a deteriorating deck edge usually points toward a rebuild that includes footing or slab repair.
Storm damage
After a tropical storm or hurricane, the first thing most homeowners notice is shredded screen. That is often the least important damage. High winds can bend roof members, twist columns, loosen anchors and stress the house connection even when some mesh survives. In fact, screen that blew out may have relieved wind pressure on the frame, while a cage that kept all its screen may have taken more load.
After a storm, keep clear of a cage that is visibly leaning or has members hanging, and have it inspected before anyone climbs on it or starts replacing mesh. Localized damage, such as a few bent members on one side, can often be repaired by replacing those parts, re-anchoring and rescreening. When damage runs across multiple walls and the roof, repair costs can approach the cost of building new, and replacement becomes the more sensible path. If you are filing an insurance claim, ask your contractor for a written description of what was found. Your carrier, not the contractor, decides what is covered.
Current wind-load code
Florida requires screen enclosures to be designed for the wind loads that apply at the property's location, and those requirements have been strengthened over the years. An older cage was built to whatever applied when it went up. It is not automatically unsafe, but it may not match what a new design would require today, especially on larger or taller enclosures.
This matters for the decision in two ways. First, when you rescreen a sound frame you are generally maintaining the existing structure rather than redesigning it. Second, when you replace the enclosure, the new design is engineered to today's requirements for your address. If you are weighing a large repair against replacement, the fact that a new cage would be built to current standards belongs in that comparison. A contractor should be able to explain how the requirements apply to your home without inventing numbers or making promises about how any structure will perform in a particular storm.
When a permit is required
Ordinary rescreening of an existing, sound frame typically does not need a structural permit because the structure is not changing. Replacing structural members, re-anchoring, rebuilding sections or putting up a new enclosure generally does, along with engineered drawings and inspections. Requirements differ between counties and cities, and the parcel, not the mailing address, determines which building department reviews the work.
Ask any contractor who will pull the permit and how it is reflected in the written quote. A licensed contractor pulls permits under their own license. AM Exterior pulls permits for its structural work as a Florida Certified Building Contractor, CBC1263331. Remember that a county permit does not replace homeowners association approval; if you have an HOA, check its architectural review process early, especially for a full replacement that may change the roof style or color.
What a contractor should inspect
A useful on-site inspection looks past the screen. Expect the contractor to walk every wall and look up at the roof members, check columns for plumb and straightness, test a few connections, and look at fasteners and corrosion at joints. They should inspect each anchor and the condition of the deck edge or footing, examine the house connection at the fascia or wall, and look at doors, kick plates and gutters. They should also ask how you use the space, whether you have pets, and whether privacy or tiny insects are a concern, because those answers affect the mesh choice if you rescreen.
At the end, you should get a clear recommendation with reasons: rescreen, repair and rescreen, or replace. Be cautious with anyone who recommends a full replacement without explaining what is wrong with the frame, or anyone who offers to rescreen a visibly damaged structure without mentioning the problem. A written quote should list what will be replaced, the mesh type by area, fastener and anchor work, any permit responsibility, and what happens if hidden damage is found once old screen or members come off.
Frequently Asked Questions
How do I know if my pool cage frame is still good?+
A sound frame is straight, does not rack when pushed, has tight fasteners and anchors, and shows no deep corrosion at connections. A contractor's inspection confirms what you can see.
Is it worth rescreening an old pool cage?+
Yes, if the structure is still sound. Rescreening a straight, well-anchored frame is usually far better value than replacement. If the frame is failing, new screen only delays a rebuild.
Do I need a permit to rescreen or replace a pool cage in Florida?+
Ordinary rescreening typically does not need a structural permit. Replacing members, re-anchoring or building a new enclosure generally does. Requirements vary by county and city.
Should I replace my pool cage after hurricane damage?+
Not automatically. Localized damage can often be repaired and rescreened. Widespread bent members, loose anchors or house-connection damage may make replacement the better choice.
Will a new pool cage be built to current wind-load code?+
Yes. A new enclosure is engineered to the wind-load requirements that apply at your address today, while an older cage reflects the standards in place when it was built.
Get your cage inspected.
Share the basics and we will arrange a visit to measure and talk through the project.
Licensed & Insured • State Certified Building Contractor — License #CBC1263331
Want a professional opinion on your home?
Call our family-owned team or request a free on-site estimate. Licensed and insured since 2011.
