Skip to main content
Florida Certified Building Contractor

Pool Cage Rescreening in Land O’Lakes & Tampa Bay

AM Exterior, a Florida Certified Building Contractor, rescreens pool cages and lanai enclosures in Tampa Bay, Florida. Working from our Land O’Lakes base across Pasco, Hillsborough and the wider Tampa Bay area, we replace torn or faded mesh, renew spline and failing fasteners, and tell you plainly when a frame needs structural work instead of new screen.

Licensed & InsuredFamily-Owned Since 20111,500+ projects completedCBC1263331
Hip-roof aluminum screen enclosure with fresh screen panels over a Florida pool deck
Repair or rescreen

Full rescreens vs single-panel repairs

Not every tear calls for a whole new cage of screen. When one or two panels were punctured by a branch, a pet or a stray ball and the rest of the mesh is still tight and dark, replacing just those panels is usually the sensible choice. We match the mesh type as closely as possible, roll in new spline and check the surrounding members while we are there, so a small repair does not hide a larger problem.

A full rescreen makes more sense when the mesh across the enclosure is chalky, brittle, sagging or splitting at the edges. Screen ages from constant sun exposure, so panels installed at the same time tend to fail around the same time. Patching one panel after another on an aging cage becomes a running expense, and the new panels stand out against the faded ones. Replacing all of the mesh at once gives you even color, consistent tension and a fresh starting point for maintenance.

Mesh options

Choosing the right screen for each panel

Standard 18x14 insect screen is the common choice for pool cages. The numbers describe the weave count, and this mesh keeps out most flying insects while letting breezes through and keeping the view open. It is a good default for the upper walls and roof panels of most enclosures.

No-see-um screen, usually woven at about 20x20, has smaller openings to block tiny biting insects common near ponds, conservation areas and wooded lots. The tighter weave slightly reduces airflow and visibility, which is why some homeowners use it only on the walls closest to seating areas. Pet-resistant screen is a heavier, tougher material intended for lower panels and door areas where claws and paws do most of the damage. Privacy and solar-style screens use denser weaves to cut glare and limit views from neighbors; they work well on a side that faces a road or a nearby window, but they also block more breeze. Mixing mesh types by panel is normal, and we will walk the cage with you to decide where each one belongs.

Know when to stop

When a frame should be rebuilt instead

New screen cannot fix a failing structure. Before we quote a rescreen, we look for bent or buckled members, corrosion where aluminum meets steel fasteners, loose or missing anchors at the deck, cracked or crumbling concrete at the perimeter, and connections at the house that have pulled away. A cage that racks noticeably when you push on a column, or one that was patched together after past storms, may not hold new screen tension well.

If the problems are limited to a few areas, targeted member replacement and re-anchoring followed by a rescreen can be a reasonable middle path. If the issues are widespread, or the enclosure was built to an older standard than current wind-load requirements, we will explain why rebuilding may be the better investment and point you to our pool cage construction page. We would rather lose a rescreen job than install new mesh on a frame that will not last. Our guide on whether to rescreen or replace a pool cage covers this decision in more detail.

Details that last

Fasteners, spline and storm damage

Spline is the flexible cord that locks screen into the channel of each frame member. Old spline shrinks, hardens and lets mesh pull loose, so we remove it and install new spline sized to the channel during every rescreen. We also check the screws that hold the structure together. Corroded or stripped fasteners are replaced, because a tight new screen puts steady tension on every connection. Where kick plates, door closers or gutters at the house connection have worn out, we can address those in the same visit.

After a tropical storm or hurricane, torn screen is often the most visible damage, but it is not always the most important. We inspect for bent members, shifted anchors and damage where the enclosure ties into the roof or fascia before replacing mesh. If your insurance carrier needs documentation, we can provide a written description of what we found and what we recommend. We do not promise insurance outcomes; your carrier decides what is covered.

Free on-site estimate

What a rescreen estimate checks

During the visit we count panels by size, note which mesh type suits each area, test frame tension and look closely at fasteners, anchors, doors and the house connection. We also ask how you use the space, whether you have pets, and whether there is a side where privacy or glare matters. The written quote lists the panels to be replaced, mesh by area, spline, fastener replacement and any repairs we recommend, so you can compare it fairly. We do not publish rescreening prices because panel count, cage height, access and frame condition vary from home to home. Ordinary rescreening of a sound frame typically does not need a structural permit, but structural repairs or member replacement may, and we confirm requirements with the local building department when they apply.

Local coverage

Communities we serve around Tampa Bay

  • Land O’Lakes
  • Wesley Chapel
  • Lutz
  • Zephyrhills
  • Odessa
  • Trinity
Local answers

Frequently asked questions

How do I know if my pool cage needs a full rescreen?+

Look for mesh that is faded, chalky, brittle, sagging or tearing in several places. If most panels show wear, a full rescreen usually gives a better result than patching one panel at a time.

Can you replace just one torn screen panel?+

Yes. When the rest of the screen is in good condition, we replace the damaged panels with matching mesh and new spline and check the nearby frame and fasteners.

What is the difference between 18x14 and no-see-um screen?+

The numbers describe the weave. Standard 18x14 mesh blocks most insects with good airflow. No-see-um mesh, about 20x20, has smaller openings for tiny biting insects but slightly less airflow.

Do I need a permit to rescreen my pool cage?+

Ordinary rescreening of a sound frame typically does not require a structural permit. Replacing members, re-anchoring or rebuilding may, and we confirm requirements with the local building department when they apply.

Should I rescreen or replace my pool cage after a storm?+

It depends on the frame. We check for bent members, loose anchors and damage at the house connection. If the structure is sound, rescreening is usually enough; if not, we explain repair or rebuild options.

Free on-site estimate in Tampa Bay

Tell us about your screen.

Share the basics and we will arrange a visit to measure and talk through the project.

We reply within one business day. No spam, ever.

Ready to talk about your Tampa Bay project?

Call our family-owned team or request a free on-site estimate. Licensed and insured since 2011.

Call NowFree Estimate