Skip to main content
Fiber cement siding installed since 2011

James Hardie Siding Contractor in Land O'Lakes & Tampa Bay

James Hardie fiber cement siding installed by a local licensed contractor who handles removal, moisture protection, trim, and finishing the right way.

Licensed, Bonded & InsuredFamily-Owned Since 2011CBC1263331
Finished James Hardie siding installation on a two-story home, Land O’Lakes FL
Siding built for this climate

What We Install

We install and replace James Hardie fiber cement siding, including HardiePlank lap siding, HardieShingle shake-style siding for gables and accent areas, and HardiePanel vertical siding for board-and-batten looks. We handle full residing jobs, partial replacements, and repairs to existing fiber cement installations.

We also install vinyl siding for homeowners who want a lower up-front cost, and we will tell you honestly where each product makes sense for your home and budget.

Hardie has become the go-to siding in Florida for a reason. Fiber cement does not rot in our humidity, termites and wood-destroying insects leave it alone, and it holds up to wind-driven rain and storms far better than wood. It also stays dimensionally stable in extreme summer heat where vinyl can warp, ripple, or sag on a sun-exposed wall.

The details under the siding matter as much as the panels: proper removal and disposal of old material, inspection and repair of sheathing, a correctly lapped moisture barrier, flashing at windows and penetrations, and trim that is caulked and finished so water stays out of the wall assembly.

Measured on site

Every wall measured before materials are ordered or priced.

Full tear-off

Old siding removed and sheathing inspected, not covered over.

Moisture managed

House wrap, flashing, and caulking done to spec.

One accountable crew

From estimate to final walkthrough with the same team.

From old siding to final walkthrough

How the Process Works

A residing job touches weather protection, structure, and finish, so the sequence matters. Here is what a typical project looks like start to finish.

01

Free estimate & measurement

We measure every wall, check the condition of existing siding and trim, and talk through product and color options.

02

Removal of old siding

The crew tears off old material, disposes of it, and inspects the sheathing for rot or damage that needs repair first.

03

House wrap & moisture barrier

A properly lapped weather-resistive barrier and flashing at windows, doors, and penetrations goes on before any siding.

04

Hardie installation

Panels or planks are fastened to spec with correct clearances, joints, and nailing patterns for our wind zone.

05

Trim & finish

Corners, fascia, soffit transitions, and caulking are completed, then ColorPlus or field-painted finish is applied.

06

Final walkthrough

We walk the whole home with you, handle any punch items, and review care and warranty information.

Depending on scope, siding replacement may or may not require a building permit in your municipality—full residing and structural sheathing repairs often do, while small repairs sometimes do not. Either way, we determine what your project requires and handle any required permit and inspections ourselves.

Straight answers before you commit

What It Costs

Siding pricing depends on the size and dimensions of your home, the amount of existing siding to remove, trim work, and the finish selected. Because every home is different, there is no fixed price range to quote here.

Home size & dimensions

Total wall area, number of stories, rooflines, and architectural details all affect material and labor.

Existing siding removal

The amount of old siding coming off, disposal, and any sheathing or rot repairs discovered during tear-off.

Trim, finish & details

Corner boards, fascia, soffit transitions, caulking, and the choice between ColorPlus and field-painted finish.

Displayed price ranges on other pages are general estimates only, not a guaranteed quote. Final pricing depends on your specific project — home dimensions, site conditions, materials, access, and scope.

We deliver premium, high-quality work regardless of home size. Every homeowner receives an exact free written estimate after a site visit, with line-item pricing for materials, labor, and any required repairs.

Rotten sheathing, termite damage, or code-required repairs discovered after tear-off can affect the total. We document anything we find with photos and get your approval before proceeding — no surprise charges at the end.

Financing is available.

AM Exterior partners with Lyon Financial to offer financing options for qualifying siding projects. Explore possible monthly-payment plans before deciding how to scope the work.

Learn about Lyon Financial
Why it outperforms wood and vinyl here

Why James Hardie for Florida Homes

Florida is hard on exterior cladding. Year-round humidity rots wood siding, termites treat it as food, and hurricane-season storms drive rain into every seam. Fiber cement is made from cement, sand, and cellulose—it does not rot, insects cannot eat it, and it is rated for high-wind applications when fastened to spec.

Compared to vinyl, Hardie does not warp, ripple, or soften on walls that take direct afternoon sun, and it holds paint far longer. James Hardie products typically carry a 30-year limited product warranty, and the ColorPlus factory finish carries its own finish warranty—real long-term protection, not a maintenance cycle.

Day to day, it is low maintenance: no scraping and repainting every few years like wood, just occasional rinsing and a caulk check. AM Exterior is a State Certified Building Contractor, license CBC1263331, and is licensed, bonded, and insured.

CBC1263331

State Certified Building Contractor

Family-Owned Since 2011

Local accountability before, during, and after the job.

Profiles, finishes, and colors

Materials & Options

The right specification depends on your home's architecture, sun exposure, and the look you want. We bring samples to the estimate and explain where an upgrade changes performance and where a standard option is sufficient.

HardiePlank lap siding

The classic horizontal profile in smooth or woodgrain texture, in multiple exposure widths. The most common choice for full residing in Tampa Bay.

HardieShingle & HardiePanel

Shingle-style panels for gables and accent areas, and vertical HardiePanel for board-and-batten looks on modern and coastal elevations.

ColorPlus vs field paint

ColorPlus is a baked-on factory finish with its own warranty and consistent color. Field painting offers unlimited color choice at a lower initial cost.

Florida color trends

Coastal whites, warm grays, soft blues, and deep navy with white trim are popular across Tampa Bay neighborhoods and hold up well visually in bright sun.

Built across Tampa Bay

Recent Siding Projects

View full gallery
Finished James Hardie siding installation on a two-story home, Land O’Lakes FL

Finished James Hardie siding installation on a two-story home, Land O’Lakes FL

Old siding tear-off in progress during a residing project, Tampa Bay FL

Old siding tear-off in progress during a residing project, Tampa Bay FL

Sheathing and moisture barrier exposed before new siding installation, Land O’Lakes FL

Sheathing and moisture barrier exposed before new siding installation, Land O’Lakes FL

Seven-county service area

Where We Install Siding

Our crews install James Hardie and fiber cement siding from our Land O’Lakes home base throughout Tampa Bay and neighboring Central Florida counties. Use the county links for local service details and cities covered.

Enclosing an outdoor space too? See our screen enclosure page.

Free siding estimate

Tell us about your home.

Share the basics. We will call to discuss the project, measure your home, and prepare an exact estimate.

We reply within one business day. No spam, ever.

Planning answers

Frequently Asked Questions

How much does James Hardie siding cost in Florida?+

Siding pricing depends on the size and dimensions of your home, the amount of existing siding to remove, trim work, and the finish selected. Because every home is different, we do not publish fixed price ranges. Every homeowner receives an exact free written estimate after a site visit.

Is James Hardie siding worth it in Florida's climate?+

For most Florida homes, yes. Fiber cement resists the humidity, rot, and termite damage that attack wood siding, holds up better in storms and wind-driven rain, and does not warp or melt in extreme heat the way vinyl can. It costs more up front than vinyl but typically lasts far longer with less maintenance.

How long does a full siding installation take?+

A typical full residing on an average single-story Florida home takes about one to three weeks of on-site work, depending on the size of the home, the amount of old siding to remove, any sheathing or trim repairs discovered, and weather. We give you a realistic schedule with your written estimate.

Do you install vinyl siding too?+

Yes. We install both James Hardie fiber cement and vinyl siding, and we help you compare them honestly based on your budget, the look you want, and how long you plan to stay in the home. During your free estimate we walk through both options with real pricing.

Ready to reside your home?

Call our family-owned team or request a free on-site estimate. Licensed, bonded, and insured since 2011.

Call NowFree Estimate